> Blue Screen
> P2v Migration Issues With Hyper-v: Stop: 0x0000007b
P2v Migration Issues With Hyper-v: Stop: 0x0000007b
Show 24 replies 1. reboot the VM and ensure that ACPI is enabled Without this workaround, I just got a black screen when trying to boot.So, with the combination of the two, I was able Andrew's Cheap Thrills Andrew Cohen's home on the web. Also repeat for: HKLM/System/CurrentControlSet001/Services/ and edit the "Start" parameter to the corresponding value from the list:Aliide = 3 Amdide =3 Atapi = 0 Cmdide = 3 iaStorV = 3 intelide = Source
Did Kuntī deliver Karṇa through her womb? Hear the angles sing!" --> from 'iamrobertsworry'Thanks enormously to 'Continuum', 'Andrew Cohen' and 'Roberts Worry' for unknowlingly helping to put these instructions together.References:http://iamrobertsworry.livejournal.com/791047.htmlhttp://communities.vmware.com/message/2027796http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalId=1005208 Like Show 0 Likes (0) Actions 12. I used my ISO server 2008 R2 image again, go through the same procedure, until i got to the command prompt, ran regedit and load the hive from my Windows partition The carrot is that we may run it as a VM if we wish.
P2v Migration Issues With Hyper-v: Stop: 0x0000007b
Running 2012 R2 Hyper-V Host. I had to do it a couple times but once I actually paid attention, WHAMMY! I love you, man! 11/01/2012 7:11 AM Anonymous said... Virtual box adds virtual disks to the sata controller by default.
- I'm wondering why R2 doesn't work while it have been possible before R2...
- It took a few moments but the fact that it didn't immediately BSOD and reboot I waited patiently and.....the Angels sang in 2016 bruh!(Windows 7 x64 laptop, AHCI boot, converted to
- Thanks, David Lloyd Reply Giomel says: February 28, 2014 at 8:39 pm Thanks a lot works great!!!!!
- Re: Windows 7 Guest: STOP 0x0000007B niewoo Sep 8, 2011 2:06 PM (in response to RDPetruska) ok - thanks.
- Managed to get image to convert to Destination- Upon boot, received BSOD 7B- Researched KB and found article http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalId=1005208- Tried intsalling vmscsi on Source - just got error that this is
- We captured an image from an HP server, where they were using a very cheap RAID controller.
Thank you very much.... Re: Windows 7 Guest: STOP 0x0000007B niewoo Sep 8, 2011 5:48 PM (in response to niewoo) I gave up on the built in converter (seems like it doesn't support Windows7) and I did renaming driver file, HpSAMD.sys to other so that I will not be loaded at startup, change the registry for HpSAMD service to disable (Start:0->4), but all doesn't fix so Vmware Stop: 0x0000007b These need to be removed first.
In order for me to fix it, i had to disable (0x4) some LSI-SAS services drivers that were installed in the original server and enable (0x0) my LSI-SCSI, because that is Disk2vhd Blue Screen Hyper-v The Angels singing :) Thank You 8/18/2015 2:29 PM Anonymous said... Please type your message and try again. 1 2 Previous Next 24 Replies Latest reply: Dec 12, 2014 8:50 AM by AMoeller Windows 7 Guest: STOP 0x0000007B niewoo Sep 8, 2011 I took slightly different (and less complicated, I think) steps to resolve the issue without having to re-do the P2V: Mount the Win7 DVD in VMware Player and boot to it.
At the first screen (Language Selection), hit Shift-F10 for a command prompt. Vmware Windows 7 Blue Screen Reply David Lloyd says: February 7, 2014 at 6:56 pm Mike, we are experiencing a similar issue with virtual hard disks that are created from existing Windows Vista machines. Awesome. I think the CurrentControlSet changes that are merged get pulled into one of the Hardware Profiles on reboot....without it, I was still getting the 7B on startup.Since my machine did not
Disk2vhd Blue Screen Hyper-v
Edited by chat_to_rich - 14 October 2009 at 2:50pm AntonOfTheWoods Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 13 October 2009 Status: Offline Points: 3 Thanks a lot!Did a P2V WHS2011 to ESXI 5.5.0Got around the BSOD changing: "LSI_SAS" ot 0 10/20/2014 4:42 PM Anonymous said... P2v Migration Issues With Hyper-v: Stop: 0x0000007b Goodness Giza Golf! P2v 0x0000007b March 6, 2016.
Reply alex says: November 14, 2014 at 7:34 pm Genius! 🙂 Reply jan says: December 4, 2014 at 11:05 am Thanks! Got a STOP 0x0000007B on boot. Installed integration services and the 2003 box works like a champ. Worked like a champ. Enable Disk To Be Bootable With Ide Controllers
Reply mike says: April 14, 2015 at 8:05 pm @Not_So_Ninja Would you mind posting how you went about removing the Hyper-V integration services from the VHD image, sadly my physical machine This comment has been removed by the author. 1/21/2014 5:12 PM Anonymous said... As before, I used the VMware vCenter Converter 4.0 to P2V my laptop expecting the angels to sing. have a peek here cd system32 5.
Reply Erik says: January 22, 2016 at 6:21 pm it really help me on 17 January 2016 when I was on site, thanks very much, in my case, I convert server Vm Blue Screen After P2v Run regedit. I tried the intelide setting and it didn't work, then I went through the whole list.
I actually had two problems: First, the image came out with a corrupted boot loader (I was able to fix this one using ISO Server 2008 Disk, repair mode, cmd line,
A MASSIVE THANK YOU to all the comments on the issue....I P2V my W2k8 srv onto HYPER-V 2012R2 and it DIDN'T boot. When i check the registry, all registry keys added are present exept "CriticalDeviceDatabase" keys … however, i saved it fews times on system hive but nothing … 🙁 Do you know One item: unload hive was disabled so I could not perform this step but the reboot worked anyway.Thanks. 5/24/2013 9:04 AM Anonymous said... Mount Registry Hive Reply Van says: January 15, 2016 at 7:05 pm After converting a physical Windows XP to VHD, I had the problem described in this article.
Like Show 0 Likes (0) Actions 3. The hitch is that drivers are there but not enabled in an effort to improve boot performance. I understand it's not supported scenario to use WindowsServerBackup image, but it's difficult to get the same HW only for recovering and I really appreciate any help to solve this. should i not put them under HKEY_LOCAL_MACHINESystemControlSet001Servicesatapi or leave out system?
You solved me this problem in just 1 minute google searching and half an hour rerunning disk2vhd We love you too 😉 Reply Andy says: November 12, 2014 at 10:47 am I checked, but the file is there, it looks to have the correct size and security. Thank you, Thank you, Thank you. Tanks.
Reply Forcelledo says: October 15, 2015 at 1:45 pm Thanks Mike!!!! Reply MikesMMM says: January 23, 2014 at 1:48 am Thanks! Browse other questions tagged windows-server-2008-r2 hp restore or ask your own question. The first I attempted steps found on research and ended up getting in worse shape.
Click on File –> Load Hive 7. Thanks a lot!!! Symptoms: Source of image: Hp ml350 g8 SAS raid Server Destination: Virtual box on Desktop PC Windows 2008 r2 started boot process (bar progressing) As bar completed BSOD appeared 0x0000007b My your are the king! 7/05/2011 4:15 PM Jeff said...
You are my hero! 9/08/2013 12:17 PM James Martin said... Load the system hive from the VM's disk: Highlight HKEY_LOCAL_MACHINE File > Load Hive Select < c: > \Windows\System32\config\system (name it something like "asdf") Expand HKEY_LOCAL_MACHINE\asdf\ControlSet1\Services\intelide Change the data for value type : $regedit 5. But it would be nice if a purpose built tool was included with disk2vhd that did the same thing.