> Brother Printer
> Brother Printer Error Codes
Brother Printer Error Codes
If error persists, then the document feed rollers may need replacing What to do: Machine Error: A7 Error Code: Document Feed Error: The machine has detected a problem when transmitting a Too hot, not hot enough, not heating up at all. Explanation: Check to see if the document is skidding in the document feed path, or if there is anything blocking the path. If the error code persists, the laser unit will need replacing What to do: Error Code: 31 Error Code: Density Sensor Failure: The print density is checked by a sensor looking
Brother Printer Error Codes
If error persists, then the paper pick-up rollers may need replacing or the paper path need cleaning. See Transferring your faxes or Fax Journal report.)Unusable DeviceDisconnect device from front connector & turn machine off & then onA broken device has been connected to the USB direct interface.Unplug the What to do: Machine Error: A3 Error Code: Document Jam: The machine has detected a problem with a page being sent via the document feeder.
- What to do: Machine Error: 8B Error Code: Printhead Error: The machine has detected that the thermal printhead is overheating.
- What to do: Error Code: 7D Error Code: Dirt on Drum Unit: The printer is detecting contamination in the drum unit area.
- If the error persists the scanner unit will need replacing.
- See Transferring your faxes or Fax Journal report.)Unable to Print XXThe machine has a mechanical problem.—OR—A foreign object such as a clip or ripped paper is in the machine.Open the scanner
- What to do: Error Code test: 20, 21, 22, 23 Error Code: Laser Diode Failure: The laser diodes write the information to be printed onto the surface of the drums.
- To gain extra memory, you can turn off Memory Receive. (See Memory Receive (Monochrome only).)• Print the faxes that are in the memory. (See Printing a fax from the memory.)The memory
- What to do: Error Code: CF Error Code: Waste Toner Box Full: While printing the printer creates a quantity of waste toner.
- If the error message continues, disconnect the machine from the power for several minutes, then reconnect it. (The machine can be turned off for approximately 24 hours without losing faxes stored
- If the error code persists the laser unit will need replacing.
Explanation: Check the paper path is clear of obstructions. What to do: Machine Error: 30, 31, 32, 33, 34, 35, 36, 37, 38 Error Code: Carriage Unit Travel Errors: The machine is detecting an error with the movement of the What to do: Error Code: A5 Error Code: Scanning Error: When a fax is being sent the machine detects an error with the scanning unit. Brother Mfc Error Codes No Response/BusyThe number you dialled does not answer or is busy.Verify the number and try again.Not RegisteredYou tried to access a One Touch or Speed Dial number that is not programmed.Set
It is saying that the document is too long to be scanned. Brother Printer Error Message Explanation: An engineer will be required to replace the waste ink box and reset the waste ink counter. What to do: Error Code: CF Error Code: Waste Toner Box Full: While printing the machine generates a quantity of waste toner. Explanation: Check that the document is not skidding in the reader section of the machine.
Brother Printer Error Message
If error persists, then the waste toner sensor may be faulty. Explanation: Switch the machine off and back on again. Brother Printer Error Codes Make sure the jam clear cover is closed properly. (MFC-6490CW) Open the outer rear cover and inner rear cover. Brother Printer Troubleshooting Guide We are now investigating the problem.
Explanation: Check the quality of the paper and reseat it in the paper tray. http://attavik.net/brother-printer/brother-printer-error-light.html If problem persists the main motor may need replacing. Explanation: Check the paper path and gently remove any trapped paper. Explanation: Switch the fax machine off and back on again. Brother Fax Machine Error Codes
Open the body of the printer and look for jammed paper. Explanation: The density sensor has a protective shutter to keep dust and loose toner off it. Explanation: Switch the printer off and back on again. Source What to do: Error: E51 Error Code: Malfunction of laser unit: The laser unit is the part of the printer that writes the information on the drum surface.
What to do: Machine Error: 8A Error Code: Printhead Error: The machine has detected a problem with the thermal head that is used to print the information on the recording paper. Brother Printer Error 50 the tray 1 paper feed kit needs replacing and the counter resetting. What to do: Error Code: A2 Error Code: Sending Document is too long: When sending a fax, the document sensors have detected that the outgoing fax is too long.
Explanation: Check the paper path and gently remove any trapped paper.
The machine has detected a problem with this unit. Sign in Statistics 207,026 views 270 Like this video? Just Printers Multi-Functional Printers Fax Machines Error: E50 Error Code: Malfunction of fuser unit: The fuser unit is the part in the machine that gets hot to bond the print onto Brother Printer Error Printing If nothing is found you will need an engineer to check the paper sensors.
If the error persists then an engineer will be required to determine the cause if it. Explanation: Switch the machine off and back on again. Explanation: Remove the drum unit and look for paper in the paper path. have a peek here Explanation: Worn fuser units can cause poor quality print paper jams.
Uttam Kumar 10,343 views 5:51 Brother MFC-7420 Paper Feed Kit Video Instruction - Duration: 8:58. What to do: Error: Clean Drum Unit Error Code: This means that the printer has detected dust or loose toner around the drum unit. Explanation: Replace the toner unit. Explanation: Check the document is not too long and that it is not skidding or being blocked.
Explanation: Worn laser units can cause poor quality print. If you unplug the machine, or take out the empty ink cartridge, you cannot use the machine until you change to a new ink cartridge.Replace the empty ink cartridges. (See Replacing What to do: Machine Error: 82 Error Code: Paper Feed Error: The machine has detected an error when trying to feed the recording paper. What to do: Error Code: 52 Error Code: Replace Tray 1 Feed Kit: The feed roller and retard pad for the main paper tray has reached the end of their life
If error persists then an engineer will be required to check the sensors.